As with humans, bathrooms too age and after a decade or two, our needs change, children have grown and gone to other towns or cities in pursuit of their careers or education. Although a DIY may be fascinating when you consider the expertise needed in multiple functional areas, the task gets somewhat overwhelming. In most bathroom renovations, there is always some amount of tiling, plumbing, electrical, painting and perhaps even a bit of masonry. Each of them is a small job when bifurcated, but appropriate tooling essential to do a perfect job. Add to this the fact that you are also possibly stepping into your sixties, the balance tilts towards a professional bathroom renovator than considering a DIY job.
With a reputed and experienced bathroom renovator in Melbourne, you could, in fact, be getting a better bathroom with more embellishments that you had imagined, and potentially a lower overall cost too. Modern bathrooms are also distinct from what most of us have been used to over the past couple of decades. This is yet another reason why homeowners can benefit by hiring a professional to undertake bathroom renovations.
Many seniors also tend to prefer a shower than a tub considering convenience as well as safety. But, when your thoughts gravitate towards a tub, you should also be looking a step-down tub and try out the tub before actually buying it. Ideally, you should sit in the tub, check the comfort factor for your headrest, grab bars and neck support. Considering all these, is it not ideal that a single agency is entrusted with the entire work of renovating your bathroom, rather than your running around in circles for several days?
Here is a list of the top bathroom renovators in the Melbourne area
Concept Bathrooms is reputed to ensure client satisfaction throughout its existence of over 25 years in Melbourne. Professional customer service combined with years of expertise in providing the best outcome for your bathrooms or kitchen renovation has earned Conceptbathrooms an enviable reputation around the greater Metropolitan area of Melbourne. Conceptbathrooms understands how bathrooms and kitchens have become the focal point when owners are trying to rent or sell a home.Concept Bathrooms specialises in bath and kitchen renovations including renovations for elderly and disables in the Melbourne region. They are a registered Masters Builders Association of Victoria (MBAV), and have significant professional experience and have carved out a niche for themselves among other professionals. Concept Bathrooms offer high-quality workmanship and exceptionally reliable installation services ensuring perfect makeover of your bathrooms.
Bathroomcontractors bring over 28 years of quality experience in the Australian building and plumbing space. They provide world class workmanship in the domestic market of Melbourne. Irrespective of whether you are looking for a new bathroom to be constructed or renovate an existing one, you can rely on bathroom contractors for design and installation of your exacting requirements.
Roomfour specializes in the renovation of big as well as small bathrooms in Melbourne. Irrespective of the size of the bathroom Roomfour focuses on injecting life into your bathroom renovation. Tailoring a design that suits the space available to your bathroom is another speciality offered by this business. Roomfour also brings the capability to deliver turnkey jobs with precision to customers who desire the option.
Melbourne Bathroom Experts
Melbourne Bathroom Experts specialize in renovating mid to high-end bathrooms, shower repairs, new installations, tiling and plumbing, apart from laundry renovations across the metropolitan area of Melbourne.
In the 2 decades of its existence, Totalbathroomrenovations have renovated in excess of 2000 bathrooms in the Melbourne metropolitan area. Firm scheduling and firm prices are the promises they bring to the table along with peace of mind that accompanies guaranteed fittings and fixtures.
Selectkitchens specialize in bringing tired bathrooms back to life improving the quality of life for the homeowner while increasing the value of the home significantly. Services of Selectkitchens are available in the greater Metropolitan area of Melbourne and her suburbs like Parkdale, Mentone, Brighton, Black Rock and Balwyn.
Designer bathrooms Melbourne
Designer Bathrooms have established themselves as a reputed business in Melbourne and her suburbs with highly satisfied clients throughout their 13 years of existence. They are also among leading specialists in imported as well as local designer bathroom products. Homeowners keen on the latest trends in innovations and European styles can expect that true feel of luxury when they work with Designerbathrooms Melbourne for their bathroom renovations.
Burrowsconstruction brings over 26 years of experience in renovating bathrooms in Melbourne and her suburbs. They are registered Master Builders and specialize in delivering a high standard of execution for every homeowner. They also undertake general maintenance of your property and extensive renovation of your property. The Managing director personally oversees every single project so that homeowners get nothing short of the best.
Cameron brings a wealth of experience and knowledge in bathroom renovations. Melbourne customers can expect nearly everything that is needed for their bathroom renovation to be available in stock with Cameron. This way, there is no waiting period or running around in circles gathering the required materials. Cameron also focuses on using the full effect of mirrors and lighting to convert small spaces into seemingly large and yet personal. The soft ambient lighting surrounding mirrors add beauty and functionality to the bathrooms and Cameron has the ability to achieve this.
With a plethora of modern fixtures and fittings introduced into the bathroom space, bathroom renovation has become more a necessity than a luxury in recent times. In modern homes, bathrooms have even been promoted to be the mini Spas adding convenience as well as glitter. A well-appointed kitchen and bathroom also come into focus when the homeowner is seeking to sell the home or rent it out. The wide array of service providers in Melbourne also ensures that professional services are always available to the needy.
IoT or the Internet of things has changed the way most of us live and work in peace. Remotely controlled smart homes today ensures that the homeowners control door locks, vacuums, thermostats, lights and even the pet feeders irrespective of their physical location, with the help of a smartphone. Monitoring your homes has not only been simplified but also made pretty much affordable. The highly customizable smart security systems are also offered as DIY kits or as kits for full-blown setup including professional installation as well as monitoring.
Homeowners also have the ability to choose either a wholly dedicated security system or individual devices that can control specified devices and control those devices remotely. These include security cameras for indoor and outdoor deployment, smart locks and video doorbells.
For homeowners considering entry-level systems, typically, most offerings include some window and door sensors, motion detector and a hub which communicates with these devices via a single or multiple wireless protocols like Wi-Fi, ZigBee, Z-Wave or even a proprietary mesh network. Additions can be made to these entry-level systems to ramp it up to a comprehensive system to cover your entire household with surveillance cameras, sirens, lights, smoke detectors, water detectors etc. The components in most systems work seamlessly and users can manipulate them following the rules of customization. Video recordings can also be stored on a local SD card or programmed to be stored in cloud storage. While cloud storage is significantly superior to the local storage option, it is also pretty expensive and particularly so, for homeowners.
Most home security systems offered in modern times also come equipped with a mobile app that makes your smartphone a command centre to control the home security system. Some apps even have the capability of arming or disarming devices according to your physical location. Thus, when you are at home, some of the devices turn off, and when you step out and lock the main entrances, these devices are automatically turned on.
Professional installation or a DIY
Most homeowners choose the DIY option because of the significant savings it brings along in the form of installation charges. Most DIY CKD kits can be easily installed and configured. Another desirable feature is the scalability that most of these systems offer. Thus, if you decide to add a few more devices to an existing system, it is a no brainer. However, most of the entry-level systems may not support multiple wireless options while the higher end systems will not have such limitations. Understanding compatibility to add on components and limitations that apply to the system you choose would be a great idea. Many DIY vendors are also offering professional services to monitor your home security system on an as-and-when needed basis. This way, you have the ability to relax when you are away from home for several weeks, like on a vacation for instance and pay the service provider only for that particular duration.
Many systems employ wireless components that can be installed with the help of double-back tape. But, some of the high-end systems employ components that can be installed only by professionals. These systems typically cost significantly more and you may also have to enter into long term contracts for professional monitoring. After some time, if you decide to break free from the contract, the termination charges can be substantial. One great advantage of the professionally installed system is that everything from scratch is taken care of and the homeowner can simply relax and watch the proceedings. You may also want to check your local regulations to see if some kind of permissions is needed before you get your home security system installed.
On that note, some of the top rated home security providers in Victoria are:
SimpliSafe Home Security claims to be offering smarter, better home security with exceptional value. Notably, while the upfront price is starting at around $550, there are no annual contracts to worry about, no landline would be required and there are no middlemen either. Apparently, there is a world of difference in price between a wired system and one that is wholly free of all those wires. Installing the wires and pulling them out when not required are also expensive. Simplisafe systems claim to extinguish all those pains in one go.
Dhillon Networks is an Australian owned & Melbourne based home security company. Approved by Victoria Police, Dhillon Networks Pty Ltd is Victoria Police approved security system supplier company and has a large number of certified installers for home security equipment installations in all major Melbourne suburbs. The company also offers Antenna & Home Theatre installation, Audio/Visual, Data and telephone communication services and products. Homeowners in Melbourne and her neighbourhoods like Melton, Geelong, Marsh and Bacchus can avail the services of Dhillon networks. Major brands the company deals with include Dahua, Bosch, Digitek, Pardox, Swann and Hikvision.Dhillon networks also offers smart home security systems on a DIY basis and is considered ideal for frugal homeowners who are looking to monitor their assets and homes themselves without drilling a hole through their wallet. However, the homeowner is responsible for triggering necessary action as and when an alarm goes off. Extended services would require a subscription at an additional cost.
RACV offers home security systems, alarms with secure monitoring apps. RACV website allows you to find the best ways to protect your home. They also provide the comprehensive info on basic steps required for the protection of your home and family.
Frontpoint offers DIY home security systems like Smanos W0201 and iSmartAlarm which are relatively inexpensive to keep your home secured. Full blown systems monitored professionally installed and monitored on the other hand are more expensive and may involve long term contracts too. Frontpoint systems, on the other hand, constitute a mid-way approach where the homeowner installs everything and the company caters to the 24×7 monitoring. Some components of the Frontpoint packages tend to be expensive.
The manufacturing facility of SkylinkNet is located in China and near to Hong Kong. There is a 100,000 square feet production area with fully automated manufacturing facilities including Surface Mount Machines, Automatic Wafer Chip Bonding, Reflow Oven, IQC QC and QA, Environmental Testing Facility, etc. It also has offices in US and Canada.
With warehouse space costing the moon, pallet racking systems offer the best means of optimizing space utilization without sacrificing convenience. Pallet racking comes in different types and it is not a case of one size fits all. Therefore, it is essential to understand the options you have before deciding on what is best suited for your needs. Let us examine the different types and explore their advantages/disadvantages so that you can make informed decisions. Colby Racking from Dandenong says, Before we explore the details, one should consider some of the important factors that will influence your decision of setting up new warehouse:-Your budget for an appropriate racking solution
The floor space available in your warehouse
The height of the ceilings
Size and type of pallets used by you
Number of SKUs to be stored in the racks
Frequency at which you have to access the pallets
Shelf life of the product and the movement pattern you would use, like First in First out (FIFO)or Last in First Out (LIFO)
Number of pallets you have to store
Type of forklift trucks employed for accessing the racks. Lift height of the truck
Once you have collated the answers to the above question, you are better prepared to explore types of pallet racking that answer your needs.
This is a very basic method in pallet storage wherein pallets sit on the floor in rows. The rows can occupy the entire depth of the warehouse taking into consideration your accessibility needs. If the pallets can support the load, they can also be stacked one upon the other. However, in such a case, you are typically using the LIFO system of stock movement.
The advantages of the system are that you are not required to invest in any equipment and you get a high storage density. However, the disadvantages include poor access to the pallets and significant amount of floor space being consumed
Selective pallet racking
This is the most common pallet racking in use today. Selective racks use uprights and cross beams for creating a “shelf” to store the pallets. Typically, you can create multiple levels in each bay if the height of the warehouse permits. Generally, a bay is one pallet deep though it could be possible to create two-deep systems.
This is a relatively cost-effective storage solution compared to storage solutions that are denser. It will facilitate access to all your pallets and you can operate on LIFO or FIFO basis. However, since you will provide aisles between the rack rows, storage density is lower compared to other options.
Drive through/Drive-in pallet racking
Fork trucks can drive straight into a bay when you use the drive-in pallet racking. The face of the bays remains open since the pallets will rest on the sides of the rails than the cross beams. Typically, the uprights are tied together on the top adding rigidity to the system. The difference between a drive-through and drive-in systems is the availability of an entrance at both ends or a single entrance. When you have an entrance both ends, the drive-through system is more desirable.
Commonly this type of racking accommodates 6 to 8 pallets in each bay (depth). Forklifts elevate the load to an appropriate level and load the pallet at the rear end of the system first. The second pallet gets into the second position from the rear and continues till one lane is full. Drive-in racks necessarily operate on LIFO basis while the drive-through racks work on FIFO basis and are ideal for storing large volumes of pallets with same/similar products.
With this system, you can get a high storage density and lesser cost compared to a flow rack system. However, with the forklift trucks driving the system, the racks are susceptible to frequent damage. Further, the accessibility may be poor for all pallets.
Pallet Flow Racks
This system typically uses cross beams and uprights supporting a gravity roller conveyor housed within the rack. The rollers are slightly pitched allowing the pallets to naturally flow towards the front end of the system. As you unload a pallet from the front end of the system the pallet behind moves forward, to occupy the exit position. Like the drive-in racks, this system is ideal for storing large quantities of pallets of identical product. This system works on FIFO basis. This type of racks allows high storage density and you can store 20 plus pallets along the depth. There is no need to drive into the racking system though accessibility to all pallets is not optimal. Another disadvantage with this option is the higher investment needed compared to other options you have.
Predominantly cantilever racking is employed for storing long products such as steel rods, long timber logs, plastic piping etc. This type of racking has a series of columns with protruding arms designed for the product specifically. Cantilever racking is custom made to address your exacting requirements and is a measure to optimize the storage space you get.
Narrow Aisle Racking
This is a type of selective racking with significantly narrower aisles compared to selective racking. Warehouses operating on man-up or man-down lift trucks generally find this type of racking beneficial since the lift trucks can move comfortably through the narrow aisles. Narrow Aisle racking also allows you to optimize space utilization and allow you to use every inch of vertical space you have.
Carton Flow Racking
This type of racking employs a bed of rollers usually installed in selective racking with double entry. A series of rollers are housed in the bed designed for efficient and easy movement of the stock. Businesses that need a stock to be loaded, picked and sorted manually by warehouse employees will find this type of racking beneficial. Customizing every aspect of the roller trays will further optimize space utilisation and stock movement.
Heavy duty racking
Businesses that need storing of heavy-duty items will find this type of racking advantageous. A wide load can also be accommodated in this type of racking and an example of the load is large chunks of steel.
Taxi hire space across the globe is going through a metamorphosis of sorts. The new kid on the block is the hailing taxi applications that have taken root in many cities and a major factor that makes them tick is customer satisfaction. There is no denying the fact that some of these services did experience sporadic instances of bad behaviour by their drivers and in many nations, the companies running these app-based taxi hailing services have been hauled up by the law enforcement agencies.
Traditionally, taxi operations are pretty much a business focusing on local customers such as travellers arriving at airports, train stations or other means of intercity and intracity transport. In bigger cities, people also hire taxis for getting around on various errands and no one ever thought of taxi hire as an organized business with an international flavour. Uber was among the first to dig into this massive space and quickly spread its wings far and wide. The success of Uber saw competition hotting up pretty fast and soon they had some competition to reckon with in many parts of the world. But, that notwithstanding, Uber has continued its journey on a healthy growth trajectory.
For the traditional taxi business in Victoria and elsewhere, the app-based taxi hailing services came as a bolt from the blue and many of them were unprepared for the sea change that these taxi aggregators or app-based taxi hailing services made to the market. In most markets where these services were introduced, customers started pouring in and suddenly these services came to be defined as a standard for taxi services.
Ashish Rekhi, owner of Melbourne’s biggest and top-rated maxi cab company, Taxi Maxi says “In some markets, for long, customers were literally taken for a ride and now with customers beginning to experience what a taxi service should be, it is pretty much difficult to ask customers to forego the desirable experience that they have started enjoying. The reason customers love our service than competitors is that we take serious introspection to enhance customer satisfaction levels.”
Customer experience with traditional taxis in Australia and elsewhere has also been impacted by systemic issues. In Australia, for instance, taxi licensing comes at a hefty price and obviously, this gets factored into what the customer pays for the service. The App based taxi hailing services appear to have succeeded in short-circuiting this regulatory requirement significantly influencing their pricing. Thankfully, the Victorian government appears to have acknowledged the anomaly and measures are underway to mitigate the pain.
Historically, taxi licenses in Australia had all the trappings of an investment such as in the stock markets or bullion markets. But, with the arrival of the App based taxi hailing services, the price of these licenses have been falling like the proverbial nine pins dealing a body blow to the license holders. The sooner the Government addresses this issue, the better it would be for the Australian taxi industry in general.
Suddenly, we have jumped into an era where the customer is flooded with options. And, when many of these options are offering not just improved services, but also cheaper prices and more comfortable vehicles, taxis that struggle to keep fit and drivers who tend to forget that they are not the masters only add to the overflowing cup of woes that the taxi industry is experiencing.
Customer focused orientation
The taxi industry is at the crossroads, not only in Australia but also in many cities around the world. They need to reinvent the wheel to stay in the race. For long, customers have suffered from late reporting, missed flights, unclean vehicles, improper behaviour from drivers, no-shows after accepting a booking, and the list of woes customers faced can perhaps go on endlessly. Time has arrived now for the taxi industry to take stock, get into the shoes of the customer and understand how they can gain lost ground.
The last two decades have brought a sea of changes in the way we live. The internet, in particular, has impacted millions of lives through some have suffered negative impact too. For instance, two decades you could never imagine a successful business without a handful of secretaries and typewriters. While computers have taken over the role of typewriters, secretaries are fast disappearing because most jobs handled by them are handled by the bosses, perhaps, more efficiently too! We simply cannot wish away these changes, particularly when the changes themselves are for the better. Therefore, traditional taxis around the world, including Australia need to learn the art of converting threats into opportunities. No government can ever force a customer to hire a particular service. Governments create environments in which citizens get the facilities they need to make life more convenient and easy. But, when technology brings more relief to people, government initiatives take to the back seat. If taxis are not hired by passengers, there is little that the government can do to force them. In other parts of the world, people are already finding ways to compete with the App based taxi hailing services and some of them are already tasting success. The need of the hour is to realign the thinking and focus on a paradigm shift in attitudes. Services for which a customer is paying cannot be pushed down his throat. Service providers must endear themselves to the customer.
The Australian taxi industry in general and maxi taxis like Taxi Maxi should receive considerable attention from the regulators. One factor that will work in favour of the taxi industry is the softening of fuel prices in the past couple of years. If we go by the current global predictions the trend is likely to remain stable or even move further down. An upward move in fuel prices in the international market appears to be a distant cry, at least for now. The government, on its part also appears to be seriously concerned about the plight of the taxi industry and one would expect favourable decisions emerging sooner than later.
Setting up a small business and nurturing it into a healthy business is fraught with several challenges. Most businesses comprise of multiple disciplines like finance, marketing, inventory management, stores, logistics and so forth. It is unlikely that the small business owners have adequate expertise in all disciplines through the success of the business itself will be guided by the level of efficiency in all the relevant disciplines.
Financial management is among the core functions of any business and proper bookkeeping is essential for the business owner as also to meet the statutory stipulations applicable in your state. Outsourcing bookkeeping from local companies, such as BAS Group in Victoria, is a great idea for small business owners since it puts that bit of extra time on their hands to focus on activities that can enhance revenues for the business through networking, meetings and by establishing a relationship with customers. This is particularly so when the business owner is not conversant with the nuances of bookkeeping and he is always dependent on someone more competent and qualified to do the job.
Outsource bookkeeping with the help of the digital world
The digital world has impacted our lives in more ways than one, and outsourcing work is a major benefit that we have from the digital world today. The seamless character of the digital world also makes it convenient to find competent professionals who are either close to your physical location or distanced by several thousand miles. If you devote a few hours of quality time researching the task of outsourcing your bookkeeping, you will be amazed at the options that are thrown at you.
There are also several freelancers offering expert services and you can carefully examine the individual profiles to determine suitable candidates before establishing contact with them. Cost is always a prime consideration for small business owners and freelancers often tend to be significantly more competitive compared to established businesses. It is important however that you have the ability to employ the additional time gained from outsourcing into other aspects of your business to enhance your revenues.
Advantages of bookkeeping for Australian small business owners
The bookkeeping function of your business is critical for several reasons. Your taxes and payroll need to be perfect and potential mistakes can be fraught with serious repercussions for your business. Improper filing, omission and mistakes in your tax returns can also attract penalties. Conversely, when bookkeeping is outsourced, the professional take charge and he/she is responsible to ensure that everything is maintained correctly and comply with the regulations in force.
Multitasking is fine, but…
Multitasking is fine but only when you are at home with what it takes to carry out all those tasks perfectly. You may execute 5 different tasks on a given day or month and 4 of them are perfect but one has gaping holes. Imagine the pain that the single task that was not properly done can inflict on your business. In such a situation, you have no one other than yourself to blame for the consequences. Therefore, multitasking can be good enough on a given day, and not as a routine. Each one of us has our own areas of expertise and focusing on that expertise is the best way to set up and nurture your small business
Some people simply do not comprehend the numbers
Lawrence is an exceptional computer hardware engineer and can rip open the most complex computers and bring them back to prime health within a reasonable time. He is also an expert in locating the trouble points and mending them efficiently. But, when it comes to taxes, collecting bills, following up with clients or filing returns, he is less than a novice. Imagine the additional time as well as the peace of mind he gets by outsourcing his bookkeeping. You don’t drive a car if you are not trained behind the wheels and in the world of business, bookkeeping also needs to be handled by someone who is qualified, competent and trained to handle the task. There are no exceptions to this.
Ability to hire competent people only for the amount of work you have
A constraint that operates while hiring employees for your business is that you do not have adequate work for the employee, during the early days of your business. Maybe, your growth trajectory is good and you are expecting a constant increase in workload. But, that also leaves the potential hazard of having to pay someone for no work also because things do not happen as planned.
Once again, you can turn to the digital world for help with hiring people by the hour. If your bookkeeping work can be accomplished in under 10 hours a month, you have the ability to hire a person for just that amount of work. In other words, you need not hire a full-time bookkeeper and pay him for as many as 28 days with no work!
What happens when the workload increases?
When you bring in more revenue from your business, it is obvious that your bookkeeping work also grows in tandem. Check if the person you hired for the 10 hours a month job can stretch and cater to your growing needs. If not, you can transition to another individual who has more time at his/her disposal and provides the same quality of work.
Is there a downside to outsourcing?
Honestly, outsourcing is not without its downside. Your outsourced worker may suddenly disappear although that is a distant possibility. If that happens, you could potentially be put to serious trouble and you may have to take time out from other productive functions of your business and get your bookkeeping back in order. Another aspect you should bear in mind is that most covenants that apply to a regular employee may not apply to an outsourced worker. But, then your outsourced worker is also running a small business of his own, and therefore these are only distant possibilities.